The FC−10ETH is a bidirectional RS−232 or RS−485 to Ethernet control signal converter. It allows two RS−232 (or one RS−232 and one RS−485) controllable devices to be controlled via an Ethernet or LAN connection. 

Productdetails...

The FC-1ETHN is a bidirectional RS-232 or RS-485 to Ethernet Interface. It allows RS-232 and RS-485 controllable Kramer devices to be controlled via an Ethernet or LAN connection. 

Productdetails...

The FC−3ETH is a bidirectional RS−232 to Ethernet interface. It allows RS−232 controllable Kramer devices to be controlled via an Ethernet or LAN connection. 

Productdetails...

The FC−5 is a protocol translator that makes an RS−232 controlled machine (Kramer and non−Kramer products) compatible with other RS−232 based protocols. By default the unit comes configured with two translation drivers and includes a PC based software pro 

Productdetails...

The PT−4iREX is an infrared signal repeater that can operate at distances of up to approximately 75m (240ft). This model extends infrared signals in areas where there is no direct line−of−sight for normal infrared signal operation. 

Productdetails...

The PT−5T and PT−5R are a twisted pair transmitter and receiver for infrared signals. The units control up to five devices via their own remote control IR transmitters at distances of up to 250m (820ft) over twisted pair cable. 

Productdetails...

The RC−160 is a remote control panel for Kramer switchers with RS−232 and RS−485 control interfaces. It can control any Kramer switcher up to 16x16 that utilizes Kramer’s Protocol 2000 RS−232 command set. 

Productdetails...

The RC−4 is a hand−held infrared remote controller for multimedia rooms. It functions as a part of the SummitView™ system to control audio components, video components and other room facilities such as lights and screens. 

Productdetails...

The RC−80 is a programmable remote control panel for Kramer switchers with RS−232 and RS−485 control interfaces. It controls any Kramer switcher up to 8x8 in size that uses Kramer’s Protocol 2000 RS−232 command set. 

Productdetails...

The RC−IR2 is an infrared wireless remote control unit for most Kramer RS−232 controllable switchers. The remote can switch up to 96x96 inputs and outputs. 

Productdetails...

The RC−IR3 is an infrared wireless remote control unit for all Kramer IR controllable switchers. The remote can switch up to 96x96 inputs and outputs. 

Productdetails...

The SD-7588V is a high-performance matrix switcher for SDI (SMPTE 259M) video signals. Switching is implemented during the vertical interval period according to the SMPTE RP-168 standard, when using synchronized SDI sources. 

Productdetails...

The VP-12x8 is a high-performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA on 15-pin HD connectors. It can route any or all inputs to any or all outputs simultaneously. 

Productdetails...

The VP-14 is a port extender for RS-232 data signals. It sends data from any port to the other three. 

Productdetails...

The VP−14xl is a port extender for RS−232, RS−485 or USB command signals. The unit converts the incoming commands to three RS−232 outputs. 

Productdetails...

The VP-1608 is a high-performance matrix switcher for RGBHV and balanced audio signals. It can route any or all inputs to any or all outputs simultaneously. 

Productdetails...

The VP-2x2 is a high-performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. It can route either or both inputs to either or both outputs simultaneously. 

Productdetails...

The VP-43xl is a bidirectional converter between RS-232, RS-485, and RS-422 formats. Input data in any format is converted to the other two formats. 

Productdetails...

The VP−4x4K is a high−performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. The unit can route any or all inputs to any or all outputs simultaneously. 

Productdetails...

The VP−4x8 is a high−performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA on 15−pin HD connectors. The unit can route any or all inputs to any or all outputs simultaneously. 

Productdetails...